मुख्य सामग्री पर जाएं

आउटलुक में ईमेल भेजने से पहले संकेत या पुष्टिकरण कैसे प्राप्त करें?

लेखक: सिलुविया अंतिम संशोधित: 2020-07-08

कई बार, आपने एक ईमेल भेजा है और महसूस किया है कि आपसे कुछ महत्वपूर्ण छूट गया है, या कुछ सेकंड बाद ईमेल में कुछ गलत दिखाई देता है। आउटलुक में शर्मनाक ईमेल भेजने से कैसे बचें? दरअसल आप आउटलुक में सेंड बटन दबाने के बाद ईमेल भेजने की दोबारा पुष्टि कर सकते हैं। इस आलेख में दी गई विधि आपको समस्या दिखाने में मदद कर सकती है.

VBA कोड के साथ ईमेल भेजने से पहले संकेत या पुष्टिकरण प्राप्त करें


VBA कोड के साथ ईमेल भेजने से पहले संकेत या पुष्टिकरण प्राप्त करें

निम्नलिखित वीबीए कोड आपको आउटलुक में सेंड बटन दबाने के बाद ईमेल भेजने की पुनः पुष्टि करने में मदद कर सकता है। कृपया निम्नानुसार करें.

1। दबाएं ऑल्ट + F11 कुंजी को खोलने के लिए अनुप्रयोगों के लिए माइक्रोसॉफ्ट विज़ुअल बेसिक खिड़की.

2। में अनुप्रयोगों के लिए माइक्रोसॉफ्ट विज़ुअल बेसिक विंडो खोलने के लिए कृपया डबल क्लिक करें यह आउटलुक सत्र कोड विंडो, और फिर नीचे दिए गए VBA कोड को कोड विंडो में कॉपी करें।

वीबीए कोड: आउटलुक में ईमेल भेजने से पहले पुष्टि प्राप्त करें

Private Sub Application_ItemSend(ByVal Item As Object, Cancel As Boolean)
Dim xPrompt As String
Dim xOkOrCancel As Integer
On Error Resume Next
xPrompt = "Do you want to continue sending the email?"
xOkOrCancel = MsgBox(xPrompt, vbOKCancel)
If xOkOrCancel <> vbOK Then
    Cancel = True
End If
End Sub

3। दबाएं ऑल्ट + Q बंद करने के लिए कुंजियाँ अनुप्रयोगों के लिए माइक्रोसॉफ्ट विज़ुअल बेसिक खिड़की.

अब से, जब तुम मारोगे भेजें आउटलुक में एक ईमेल भेजने के लिए बटन, एक पुष्टिकरण संवाद बॉक्स पॉप अप होगा जैसा कि नीचे स्क्रीनशॉट में दिखाया गया है। क्लिक OK यह ईमेल भेजने के लिए क्लिक करें रद्द करना ईमेल लिखते रहने के लिए.

सर्वोत्तम कार्यालय उत्पादकता उपकरण

🤖 कुटूल्स एआई सहयोगी: निम्न के आधार पर डेटा विश्लेषण में क्रांति लाएं: बुद्धिमान निष्पादन   |  कोड जनरेट करें  |  कस्टम फ़ॉर्मूले बनाएं  |  डेटा का विश्लेषण करें और चार्ट बनाएं  |  कुटूल फ़ंक्शंस का आह्वान करें...
लोकप्रिय सुविधाएँ: डुप्लिकेट ढूंढें, हाइलाइट करें या पहचानें   |  रिक्त पंक्तियाँ हटाएँ   |  डेटा खोए बिना कॉलम या सेल को संयोजित करें   |   फॉर्मूला के बिना गोल ...
सुपर लुकअप: एकाधिक मानदंड VLookup    मल्टीपल वैल्यू वीलुकअप  |   अनेक शीटों में VLookup   |   फजी लुकअप ....
उन्नत ड्रॉप-डाउन सूची: शीघ्रता से ड्रॉप डाउन सूची बनाएं   |  आश्रित ड्रॉप डाउन सूची   |  बहु-चयन ड्रॉप डाउन सूची ....
स्तम्भ प्रबंधक: कॉलमों की एक विशिष्ट संख्या जोड़ें  |  कॉलम ले जाएँ  |  छिपे हुए कॉलम की दृश्यता स्थिति टॉगल करें  |  रेंज और कॉलम की तुलना करें ...
फीचर्ड फीचर्स: ग्रिड फोकस   |  डिजाइन देखें   |   बड़ा फॉर्मूला बार    कार्यपुस्तिका एवं शीट प्रबंधक   |  संसाधन लाइब्रेरी (ऑटो टेक्स्ट)   |  खजूर बीनने वाला   |  कार्यपत्रकों को संयोजित करें   |  एन्क्रिप्ट/डिक्रिप्ट सेल    सूची के अनुसार ईमेल भेजें   |  सुपर फ़िल्टर   |   विशेष फ़िल्टर (फ़िल्टर बोल्ड/इटैलिक/स्ट्राइकथ्रू...) ...
शीर्ष 15 टूलसेट12 टेक्स्ट टूल्स (पाठ जोड़ें, अक्षर हटाएँ, ...)   |   50 + चार्ट प्रकार (गैन्ट चार्ट, ...)   |   40+ प्रैक्टिकल सूत्र (जन्मदिन के आधार पर आयु की गणना करें, ...)   |   19 निवेशन टूल्स (QR कोड डालें, पथ से चित्र सम्मिलित करें, ...)   |   12 रूपांतरण टूल्स (शब्दों को संख्याएँ, मुद्रा रूपांतरण, ...)   |   7 विलय और विभाजन टूल्स (उन्नत संयोजन पंक्तियाँ, विभाजन कोशिकाओं, ...)   |   ... और अधिक

एक्सेल के लिए कुटूल के साथ अपने एक्सेल कौशल को सुपरचार्ज करें, और पहले जैसी दक्षता का अनुभव करें। एक्सेल के लिए कुटूल उत्पादकता बढ़ाने और समय बचाने के लिए 300 से अधिक उन्नत सुविधाएँ प्रदान करता है।  वह सुविधा प्राप्त करने के लिए यहां क्लिक करें जिसकी आपको सबसे अधिक आवश्यकता है...

Description


ऑफिस टैब ऑफिस में टैब्ड इंटरफ़ेस लाता है, और आपके काम को बहुत आसान बनाता है

  • Word, Excel, PowerPoint में टैब्ड संपादन और रीडिंग सक्षम करें, प्रकाशक, एक्सेस, विसियो और प्रोजेक्ट।
  • नई विंडो के बजाय एक ही विंडो के नए टैब में एकाधिक दस्तावेज़ खोलें और बनाएं।
  • आपकी उत्पादकता 50% बढ़ जाती है, और आपके लिए हर दिन सैकड़ों माउस क्लिक कम हो जाते हैं!
Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Clicking on cancel , sends the message
This comment was minimized by the moderator on the site
Hi, I get an error message when I run this VBA code.The error is "Compile error: Sub or function not defined."
This comment was minimized by the moderator on the site
Hi the code is giving me an error saying "Compile error: Sub or Function not defined."What would be the cause for this?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
The solution worked for me once but I couldn't get it to work for me again. Any suggestions how to do that?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
This worked one time, after tha never worked again.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Hi There,

For some reason, mine, it works well only for one day. The codes don't seem to work anymore the next day, although those codes remained intact,

Anyone has such experience and know why?

Thanks.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Seeing same issue, any desired solution?
This comment was minimized by the moderator on the site
Same issue, it doesn't work for next day or after relaunching outlook, any solution?
This comment was minimized by the moderator on the site
Hi, i've got the same experience. Not sure yet how to solve this, i'm very new to VBA.
Would like to hear from you if you found a fix.
This comment was minimized by the moderator on the site
Hello! Very useful and it works perfectly.

Is it possible to adjust the code so that it only pops up when there is an attachment? Similarly, is it possible to adjust it so it prompts the pop-up only when the message is sent externally (not to people of the company)?
This comment was minimized by the moderator on the site
Hi There

Is it possible to get a message to come up only when an attachment is present, and only when sent externally?

Thank you very much!

Daniel
This comment was minimized by the moderator on the site
If you want the pop-up to only happen when you send to several emails, i.e. >10, how do you do that?

Oh and thanks, it works like a treat.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations